Parts category / servo and stopper
Servo, stopper & tilting pin
20 catalogue part numbers in this category, taken from the FLUTEK catalogue parts tables. Position numbers are the drawing positions on the pump family below, so you can read the list next to the drawing.
On this page
Parts in this category
Same position, every family - full table
One row per drawing position in this category, one column per pump family. This is where you can see at a glance whether a number carries across families or changes with the family and the control variant (DT / DTP / DTH / SH). A dash means the catalogue does not list that position for that family, and every number is a link to its own page.
| Position | Part name | K3V112 / K5V140 | K3V140 / K3V180 / K5V160 | K3V180 / K5V200DTH | K3V63 / K5V80 |
|---|---|---|---|---|---|
| 530 | TILTING PIN ASS'Y | 2953801989 2925130-0035K | 295380198 2953801988 2925130-0031S | 2953801988 2925130-0031S | 2953801787 2925130-0019A |
| 532 | SERVO PISTON | 2924490-0050 | 2943800503 2924490-0050 | 2943800503 2924490-0041 | 2924490-0030 |
| 534 | STOPPER(L) | 2953801761 2925110-318 | 2953801865 | 2953801865 | 2953801631 2925110-0057 |
| 535 | STOPPER(S) | 2953801762 | 2953801864 | 2953801864 | 2953801632 |
| 542 | STOPPER(S) | - | 2953802044 | - | - |
Reading the table: a position that is filled in every column is a part that is common to the whole range; a position with one filled column belongs to that family only. If your number does not appear here, send it to us - the catalogue line it belongs to is what decides, not the position alone.
Where these parts sit
This category appears on 4 pump families in the library. Open the family page to see the full parts table and the drawing the position numbers refer to.
| Pump family | What it covers | Parts here |
|---|---|---|
| K3V140 / K3V180 / K5V160 | The 27–40 t family: K3V140, K3V180 and K5V160. DT and DTP configurations, with K5V160 parts marked where they differ. | 8 parts |
| K3V63 / K5V80 | The small tandem pump family for 6–10 t machines, sharing the same internal architecture as the larger pumps. | 6 parts |
| K3V180 / K5V200DTH | The 36–45 t family: K3V180DTH and K5V200DTH tandem pumps used on large mining-class excavators. | 6 parts |
| K3V112 / K5V140 | The tandem pump family on 20–33 t machines: K3V112 for 20–25 t, K5V140 for 27–33 t. DT (no PTO) and DTP (with PTO) configurations. | 6 parts |
Position numbers in the table refer to this family drawing.